TECHTREX

 from Tech Line Coatings, Inc. Made with 
All TechTrex™ formulations have excellent chemical and corrosion resistant features. Resistance to specific materials will vary depending on the fillers used.

 

is a metallic ceramic coating capable of providing extremely high levels of corrosion and chemical protection in a very thin film while producing a very high luster, near chrome appearance. When applied to exhaust systems, MCX will withstand substrate temperatures of over 1300°F. In addition, direct flame will not cause delamination as long as substrate temperatures do not exceed this temperature. MCX will handle environmental temperatures of up to 2000°F. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics. Requires a 500°F cure, with maximum hardness achieved with a 650°F cure. After curing, the coating requires “burnishing” to be sealed. This burnishing process can produce a very high luster, near chrome, appearance. MCX cures out to a very hard surface with excellent adhesion. The water based solvent system provides for an environmentally friendly material with a bake/cure cycle that is not as hazardous as other thermally cured resin systems.

  • Protective to over 1300°F Base Metal Temperature
    • Maintains adhesion at environmental temperatures up to 2000°F.
  • Designed for single coat coverage (.001″ to .0015″)
    • Can be applied in a thicker film without cracking or flaking (.0018″ to .0020″).
  • High Corrosion Resistance
    • 6500 Hour Salt Spray ASTM B117.
  • May be applied over MCS to withstand higher substrate temperatures.
  • Water based, non flammable, no V.O.C.’s.
    • Requires oven curing at 500°F for 1 hour.
    • Easy cleanup with water.

Part #MCX available in Quart & Gallon. Available to professional applicators only. Safety Data Sheet Adobe_PDF_file_icon_32x32

 

TECHTREX� Product Information

All TECHTREX� formulations have excellent chemical and corrosion resistant features. Resistance to specific materials will vary depending on the fillers used.

For more chemical resistance information consult the following pages:
TECHTREX� 71000/PEEK� CHEMICAL RESISTANCE Thermal Plastic Comparisons
and
Chemical Resistance of PEEK� to Metals,Ceramics and Epoxies

71000 Standard PEEK� Dispersion

Exceptional chemical, wear, electrical and temperature resistance, as well as dimensional stability and numerous processing capabilities.
72000 containing PFA
An excellent release agent and provides a measurably harder surface than TECHTREX� 73000
73000 containing PTFE

Excellent friction reducing capabilities in low speed low pressure applications
Smooth low friction or anti-stiction
Better lubrication properties than
TECHTREX� 71000
74000 containing Extreme Wear Resistant fillers
Slightly textured, abrasion and wear resistant
75000 containing Extreme Pressure Lubricants

Extremely lubricious surface with excellent friction reduction – final coat
76000 containing Ceramic Fillers for maximum hardness and wear.
The advanced performance benefits commonly found in molded PEEK with the added benefits of Extreme Pressure Ceramic Fillers, in a spray applied coating

Less aggressive, harder, smoother more wear resistant surface than