Polyphen™ is a resin system used in several coatings including thermal barriers, thermal dispersants and slick release. Polyphen makes use of a unique binding system to retain high temperature stability while reducing thermal transfer. The film thickness as applied ranges from .0005″ to .003″ and is not sensitive to the manner in which it is applied. If a run or other excessive film build occurs it will simply bubble and crack. The damaged surface may be lightly sanded and then put in service as normally the coating is not damaged to the base metal level. Polyphen achieves full cure at 300°F, after 1 hour at temperature. When cured, Polyphen is not affected by most chemicals. Polyphen can aid in the more even distribution of heat as well as allow for quick release of molded parts with excellent reproduction. Part life increase is also a benefit as well as increased corrosion resistance. Polyphen is made from components that are known to be FDA acceptable under 21 C.F.R.
- TLTD Thermal Dispersant
- Available in Black and Dark Gray.
- TLHB Hot Stop Thermal Barrier
- Thermally cured thermal barrier. Provides increased thermal resistance while also providing a very slick surface. Excellent for the inside diameter to provide an extra layer of thermal protection.
- TLMB Solid Film Lubricant
- TLML Dry Film Lubricant
- FLO923 Slick Release Coating
- IC-105
- DS1169-1 Polyphen PPVD with PTFE
- PPVD
- DS1159-1 Abrasion Resistant Slick Release
TLHB POLYPHEN™ HOT STOP THERMAL BARRIER (HIGH HEAT I.D. COATING)
TLHB is a thermally cured thermal barrier. TLHB makes use of a unique binding system, to retain high temperature stability while reducing thermal transfer. The cured material is capable of providing increased thermal resistance while also providing a very slick surface. Film thickness as applied ranges from .0005″ to .003″ and is not sensitive to the manner in which it is applied. If a run or other excessive film build occurs it will simply bubble and crack. The damaged surface may be lightly sanded and then put in service, as normally the coating is not damaged to the base metal level. TLHB achieves full cure at 300°F, after 1 hour at temperature. When cured, TLHB is not affected by most chemicals. TLHB can aid in the more even distribution of heat as well as allow for more efficient operation of the protected part. Part life increase is also a benefit as well as increased corrosion resistance. TLHB may be applied in multiple coats to achieve maximum thickness. Apply a single coat at a time, with a ‘flash’ at 200°F for ten minutes between coats. Allow to cool to ambient before applying the next layer of material.
- Designed for the inside diameter of chrome pipes to reduce bluing.
- Excellent thermal barrier for exhaust systems, exhaust ports and brake system components.
- Smooth finish enhances flow in exhaust ports.
- May be flowed, brushed, sponged or sprayed.
- Compatible with the following Tech Line products: TLMB, TLTD and TLML.
- Solvent based, cleanup with Acetone or similar.
- Requires oven curing at 300°F for 1 hour.
Part #TLHB available in Quart & Gallon. For professional applicators only. Safety Data Sheet 