Industrial – Chemical Resistance
Tech Line manufacturers a variety of Coatings that can protect against a large number of chemicals both Acidic and Alkaline. They also have excellent Corrosion resistance as well as a variety of other beneficial characteristics.
AMADENE™ series coatings are formulated from a highly modified polymer. in a thin film the Amadene™ series allows a user to benefit from the advanced performance benefits commonly found in molded polymer plastics, in a spray applied coating. The Amadene™ series has excellent Chemical and Corrosion Resistance, in one package. The formulation can be modified to suit specific customer needs for lubrication, release, wear resistance, etc.
81000 series: Basic resin system with no modification
82000 series: Increased Release/Non Stick Properties utilizing PFA
83000 series: Increased Release/Non Stick Properties Utilizing PTFE
84000 series: Includes wear and abrasion resistant fillers
85000 series: Includes High Pressure Lubrication additives
Custom formulations are available
The PolyPhen™ family of Coatings include many that have excellent corrosion resistance. The Coatings are thermally cured. PolyPhen™ makes use of a unique binding system, to retain high temperature stability while reducing thermal transfer. The cured material is capable of providing increased thermal resistance while also providing a very slick surface with excellent Corrosion and Chemical resistance and has excellent resistance to acids. PolyPhen™ has excellent resistance to lead free solder and will protect solder pots and pumps against damage. The slick/Non Stick surface finish also works well on molds for release. The film thickness as applied ranges from .0005″ to .003″ and is not sensitive to the manner in which it is applied. PolyPhen™ can aid in the more even distribution of heat as well as allow for more efficient operation of the protected part. Part life increase is also a benefit as well as increased corrosion resistance. PolyPhen™ may be applied in multiple coats to achieve maximum thickness. Apply a single coat at a time, with a “flash” at 200f for 10 minutes between coats. Allow to cool to ambient before applying the next layer of material. All PolyPhen™ coatings may be treated with an activator that reduces the cure temperature to 200F.
FLO923™:
FL0923™ is a thermally cured release coat and anti stick Coating with good Corrosion resistance. FL0923™ makes use of a unique binding system, to retain high temperature stability while reducing stiction. The film thickness as applied ranges from .0005″ to .003″ and is not sensitive to the manner in which it is applied. FL0923™ achieves full cure at 149C/300F, after 1 hour at temperature. When cured, FL0923™ is not affected by most chemicals. FL0923™ can aid in the more even distribution of heat as well as allow for quick release of molded parts with excellent reproduction. Part life increase is also a benefit as well as increased corrosion resistance. FL0923™ is also an excellent bolt coating for use in highly acidic conditions.
TLHB™:
TLHB is a thermally cured thermal barrier Coating, which achieves full cure at 149C/300F 300F, after 1 hour at temperature, with excellent Corrosion and Chemical resistance. TLHB makes use of a unique binding system, to retain high temperature stability while reducing thermal transfer. The cured material is capable of providing increased thermal resistance while also providing a very slick surface. Excellent for molds as well as the inside of heating units/pipes etc., to reduce the surface temperature and radiated heat. Excellent for bolts, molds, flanges subject to wear and bearing surfaces. May also be used on exhaust ports to reduce heat transfer to the head and increase the flow of the air/exhaust which reduces the power needed to drive the air flow.
TLHC™:
TLHC™ is a version of TLHB™ that incorporates ceramic fillers, increasing the impact and wear resistance. TLHC™ makes use of a unique binding system, to retain high temperature stability while reducing thermal transfer. The cured material is capable of providing increased thermal resistance while also providing a very slick wear resistant surface. Recommended where abrasive action is of concern.
Custom formulations are available.
SolTech™:
SolTech™ is a water based dispersion of Polyaryletherketone a Thermal Plastic. SolTech™ is resistant to a wide range of chemicals and is capable of being used in extremely hostile environments. SolTech™ is a heat setting thermo plastic with no hazardous solvents, and is not regulated for shipping. It has excellent dielectric characteristics and is ideal for electrical applications.
(Still in development)
TECHTREX™ COATING SYSTEM
TechTrex™: is a water based dispersion of Victrex’s PEEK™, a Polyetheretherketone thermal plastic. PEEK™ is one of the highest rated thermal Plastics. TECHTREX™ is resistant to Corrosion and a wide range of chemicals and is capable of being used in extremely hostile environments. TechTrex™: can be used in an extremely wide range of applications. Virtually every industry has a need for this product. It can be used in the Automotive Industry, Oil Exploration Field, the Chemical Industry, Marine, Printing and Copying, Electrical, Transportation and a host of others. TechTrex™: can be used to provide a protective coating for virtually any part. TechTrex™: has a very hard, durable, slick surface with excellent release and a low coefficient of friction. TechTrex™: may be applied in multiple coats for applications where increased thickness is important. TechTrex™: also can be used as a base coat under other TechTrex™: formulations. TechTrex™ can be used in a wide range of applications when blended with additional materials such as PTFE, PFA, Moly, Graphite, Ceramics etc., to increase the range of uses.
NOT RECOMMENDED FOR: Materials that will be damaged by the cure temperature which is 400C/750F.
71000: Is a mixture of the pure PEEK resin and other ingredients to make it easy to spray apply. It has all the characteristics of PEEK.
72000: TECHTREX™ 72000 series thermoplastic coatings are formulated from Victrex® PEEK™. In a thin film TECHTREX™ 72000 allows a user to benefit from the advanced performance benefits commonly found in molded PEEK, combined with the release properties of PFA, and in a spray applied coating. TECHTREX™ has excellent Chemical, Tribological, and Corrosion resistance, in one package.
73000: TECHTREX™ 73000 series thermoplastic coatings are formulated from Victrex® PEEK™. In a thin film TECHTREX™ 73000 allows a user to benefit from the advanced performance benefits commonly found in molded PEEK, combined with the low co-efficient and excellent release properties of PTFE, and in a spray applied coating. TECHTREX™ has excellent Chemical, Tribological, and Corrosion resistance, in one package.
74000: TECHTREX™ 74000 series thermoplastic coatings are formulated from Victrex® PEEK™. In a thin film TECHTREX™ 74000 allows a user to benefit from the advanced performance benefits commonly found in molded PEEK, with extreme wear and abrasion resistant fillers, in a spray applied coating. TECHTREX™ has excellent Chemical, Tribological, and Corrosion resistance, in one package.
75000: TECHTREX™ 75000 series thermoplastic coatings are formulated from Victrex® PEEK™. In a thin film TECHTREX™ 75000 allows a user to benefit from the advanced performance benefits commonly found in molded PEEK, with the added benefits of Extreme Pressure Lubricants, in a spray applied coating. TECHTREX™ has excellent Chemical, Tribological, and Corrosion resistance, in one package.
76000: TECHTREX™ 76000 series thermoplastic coatings are formulated from Victrex® PEEK™. In a thin film TECHTREX™ 76000 allows a user to benefit from the advanced performance benefits commonly found in molded PEEK, with the added benefits of Extreme Pressure Ceramic Fillers, in a spray applied coating. TECHTREX 76000 provides a less aggressive, harder, smoother more wear resistant surface than 74000. TECHTREX™ has excellent Chemical, Tribological, and Corrosion resistance, in one package.
