BRAKE / WHEEL / HUB COATING GUIDE

PISTON SKIRT: TLML OR DFL-1

PISTON FACE: TLHB OR CBC2

CALIPER SIDE OF BRAKE PAD: TLHB OR CBC2

OUTSIDE OF CALIPER: TLTD

PISTON BORE: WSX

INSIDE SURFACES OF CALIPER FACING ROTOR: TLHB OR CBC2

HUB:

IF HEAT TRANSFER FROM HUB TO WHEEL IS OF CONCERN COAT THE WHEEL MOUNTING SURFACE WITH:TLHB
COAT INSIDE ( BEARING AREA) WITH TLHB TO REDUCE TRANSFER TO BEARINGS
IF TRANSFER OF HEAT TO WHEEL IS DESIRED COAT MOUNTING SURFACE WITH: TLTD

ROTOR:

COAT ALL NON CONTACT SURFACES WITH:TLTD ( CONTACT SURFACES MAY BE COATED FOR EASE OF SPRAYING IF THE COATING IS REMOVED PRIOR TO USE)
IF HUB IS INTERGAL TO ROTOR SEE ABOVE FOR COATING SUGGESTIONS
IF HEAT TRANSFER TO HUB IS NOT DESIRED COAT MOUNTING SURFACES WITH: TLHB
IF HEAT TRANSFER TO HUB IS DESIRED COAT MOUNTING SURFACES WITH: TLTD

WHEELS:

IF HEAT TRANSFER FROM BRAKES IS NOT DESIRED COAT MOUNTING SURFACES WITH: TLHB
IF HEAT TRANSFER IS DESIRED COAT MOUNTING SURFACES WITH: TLTD
TO TRANSFER HEAT FROM WHEEL TO AIR TO COOL EITHER BRAKES OR TIRES COAT INSIDE AND/OR OUTSIDE OF WHEEL WITH: TLTD
TO TRANSFER HEAT FROM THE TIRE TO THE WHEEL COAT THE PORTION OF THE WHEEL THAT IS EXPOSED TO THE TIRE AND SEALS THE AIR WITH: TLTD
TO REDUCE HEAT TRANSFER FROM THE TIRE TO THE WHEEL COAT THE SURFACE ABOVE WITH: TLHB